差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

--- fpga如何工作 [2017/09/11 01:56]
gongyu 创建
+++ — (当前版本)
@@ 行 1: / 行 1: @@
-逻辑单元（Logic-cells）
-FPGAs are built from one basic "logic-cell", duplicated hundreds or thousands of time. A logic-cell is basically a small lookup table ("LUT"), a D flip-flop and a 2-to-1 mux (to bypass the flip-flop if desired).
-The LUT can implement any logic function. It has typically a few inputs (4 in the drawing above), so for example an AND gate with 3 inputs, whose result is then OR-ed with another input would fit in one 4-input LUT.
-互连
-Each logic-cell can be connected to other logic-cells through interconnect resources (wires/muxes placed around the logic-cells). Each cell can do little, but with lots of them connected together, complex logic functions can be created.
-输入输出单元
-The interconnect wires also go to the boundary of the device where I/O cells are implemented and connected to the pins of the FPGAs.
-特定的布线（routing/carry chains）
-In addition to general-purpose interconnect resources, FPGAs have fast dedicated lines in between neighboring logic cells. The most common type of fast dedicated lines are "carry chains". Carry chains allow creating arithmetic functions (like counters and adders) efficiently (low logic usage & high operating speed). For more info, check this page.
-Older programmable technologies (PAL/CPLD) don't have carry chains and so are quickly limited when arithmetic operations are required.